flashlight not working

IPhone Flashlight not Working? Here’s what to do!

3 minutes, 42 seconds Read

iPhone flashlight not working? It’s not the end of the world, and with this quick guide, you’ll be able to troubleshoot your iPhone flashlight in no time so you can get back to whatever it was that you were doing! Before we begin, ensure your iPhone is up to date and you have a steady WiFi or internet connection.

Steps to resolve iPhone flashlight not working

These are the following steps follow:

Step 1: Check if the Flashlight not working

The first thing you should check for is if the Flashlight not working. To do this, go to Settings and tap on General. Tap on Accessibility and scroll down until you see a section called Flashlight. Make sure that it is enabled or else the Flashlight will be unusable. If it is enabled, then go to step 2 below.

  •  Check if You Have Low Power: Next up, you’ll want to make sure that there isn’t just too little power left for the iPhone Flashlight to work correctly.
  • To check this, swipe up from the bottom of your screen with two fingers so that you can view all of your battery usage statistics and information.
  • Once inside the battery page, find a spot at the top where it says battery level and make note of how many bars are showing.
  • Depending on how much charge is left, your iPhone flashlight not working may need some time to recharge before being able to use the flashlight again. For example, if one bar was showing at 0%, then charging would be needed before continuing. Otherwise, read on!

Step 2: Reset All Settings

This is a quick fix that can sometimes solve iPhone problems.

1) Go to Settings > General > Reset. 

2) Tap on Reset All Settings. 

3) When your phone restarts, it will be like new and the problem should be fixed. 

4) If the problem persists, then you may need a repair or replacement of your iPhone.

Step 3: Try a Hard Reset

If the steps above didn’t solve your problem, try a hard reset. First, press and hold the power button until you see the slide to power off prompt. After that, press and hold the home button while continuing to hold the power button until you see an Apple logo. If this doesn’t work either, contact Apple Care or visit an Apple Store near you for help. Since iPhone has such a long lifespan, your issue likely is one of these three things: dirt in the port; broken buttons; or liquid damage. With some patience and effort, you can fix them all yourself at home before having to take them in for repair!

Step 4: Restore with iTunes

If you’re having trouble with your iPhone flashlight not going on, try restoring your phone. Restoring will replace any software issues, which can sometimes be a problem. To restore your iPhone, plug it into your computer and open iTunes. If you don’t have a computer with iTunes installed on it already, download the latest version from Apple’s website. When iTunes opens, select your device in the top-left corner of the screen and then select Restore Backup. This will allow you to choose which backup of your phone you want to restore from. Once you’ve chosen one that is suitable for you, click Restore and wait while iTunes restores everything.

Step 5: Restart Your Device (not recommended but worked for me)

Restarting your device is usually something that Apple recommends as a last resort, but in my case, it was the first thing I tried. To restart your device, press and hold both the power button and home button for about 10 seconds, until you see a red slider appear on the screen. Slide the slider to turn off your device and turn it back on again. The screen should come back on without any issues.


The iPhone is notorious for breaking, and sometimes the simplest of things can break it. If you’re having problems with your phone and the flashlight not working, here are a few tips you can try. First, reboot your phone: turn it off and on again. If this doesn’t work, try restoring your phone from a backup or resetting it by pressing the Home and power button at the same time for about 10 seconds until you see the Apple logo. If that still doesn’t work, then take your phone to an Apple store so they can diagnose the problem.

Read More: How to turn off safe search on iPhone?

Similar Posts